Like the thread title says.
Does anyone here know of a vendor that sells the SBF Fel-Pro PermaTorque gaskets at a reasonable price?
I know you gotta' pay for quality, but when you're un-employed...
Thanks in advance.
Please need reasonable vendor for SBF PermaTorque gaskets
Moderators: Ranchero50, DuckRyder
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Please need reasonable vendor for SBF PermaTorque gaskets
Guys,
Like the thread title says.
Does anyone here know of a vendor that sells the SBF Fel-Pro PermaTorque gaskets at a reasonable price?
I know you gotta' pay for quality, but when you're un-employed...
Thanks in advance.
Like the thread title says.
Does anyone here know of a vendor that sells the SBF Fel-Pro PermaTorque gaskets at a reasonable price?
I know you gotta' pay for quality, but when you're un-employed...
Thanks in advance.
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
BobbyFord
- 100% FORDified!
- Posts: 5383
- Joined: Sun Feb 04, 2007 9:52 am
- Location: Chatsworth, California
Re: Please need reasonable vendor for SBF PermaTorque gaskets
Do you need just the head gaskets or a head gasket set?
http://www.summitracing.com/parts/FEL-8548PT-2/
http://www.summitracing.com/parts/FEL-8548PT-2/
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: Please need reasonable vendor for SBF PermaTorque gaskets
Bobbyford,
Thanks man.
I looked there, don't know why I didn't see that number?
All I was seeing was around the 40 per gasket, (yes, I just need the head gaskets not the complete set).
Thanks man.
I looked there, don't know why I didn't see that number?
All I was seeing was around the 40 per gasket, (yes, I just need the head gaskets not the complete set).
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4