http://www.youtube.com/watch?v=jb0u5pn3FcI
Have you stroked your bump today?
Moderators: Ranchero50, DuckRyder
-
HOWDY69
- Preferred User
- Posts: 484
- Joined: Sat Dec 31, 2005 6:31 pm
- Location: California, Sacramento
Have you stroked your bump today?
69 F250, FE Specialties 410, CJ Valves, RPM Intake, Holley 4150,......10 Smiles per gallon
71 Clydesdale in many pieces; 302 roller motor waiting impatiently
71 Clydesdale in many pieces; 302 roller motor waiting impatiently
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: Have you stroked your bump today?
Sounds good!
But he better get some coolant hooked up to it soon.
Basketcase
But he better get some coolant hooked up to it soon.
Basketcase
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
tspicer
- New Member
- Posts: 5
- Joined: Thu Oct 15, 2009 7:42 am
- Location: Emmalena, Ky.
Re: Have you stroked your bump today?
look at is http://www.youtube.com/watch?v=50-KY6ejeoI
1971 F-100, FE360