i know its a 3spd on the floor, swb, couldnt tell you the rear end.Dragon wrote:Does it still have a 3 spd with over drive in it? The rear end is supposed to be a 9 inch 3.50 to 1. With 5000 lbs GVW. It is a Short Wheel base 175 hp at 4000 rpm 360 by all the codes.
The closer the rest of the truck is to stock the more likely the engine is still stock.
how to tell what engine i got?
Moderators: Ranchero50, DuckRyder
-
f100fordtruck
- New Member
- Posts: 230
- Joined: Wed May 06, 2009 6:55 pm
Re: how to tell what engine i got?
I'll get it one piece at a time and it wont cost me a dime...
-
Dragon
- 100% FORDified!
- Posts: 2659
- Joined: Sat Feb 16, 2008 4:43 pm
- Location: Albuquerque, New Mexico
- Contact:
Re: how to tell what engine i got?
The overdive would be switch controlled and the shifter was originally on the column
http://www.fordification.com/tech/transID-man.htm bottom of the page.
http://www.fordification.com/tech/transID-man.htm bottom of the page.
Old Fords Rule
Was a Ford Service Tech
71 F250 with Shell Car 390 NP435 Dana 60 3.73s, PS, PB, 750 EC VS Holley Accel Points Eliminator.
98 Volvo S70 2.4T Auto
71 Service manuals Volumes 1,2,3 and 4 So ask away.
My Gallery
Spark test
Was a Ford Service Tech
71 F250 with Shell Car 390 NP435 Dana 60 3.73s, PS, PB, 750 EC VS Holley Accel Points Eliminator.
98 Volvo S70 2.4T Auto
71 Service manuals Volumes 1,2,3 and 4 So ask away.
My Gallery
Spark test