Harmonic Balancer - 390

[joeflsts]

I'm in the process of replacing the timing gears in my 390 and I noticed when I removed the balancer that the rubber appears to be weathered. Since I have it off I'm thinking of replacing it. This is the not the original engine in my 4x4 (it came with a 360). Will the following balancer work?

http://www.summitracing.com/parts/RNB-594-146

I'm not sure since the description states from '73 to '76 and I'm not sure of the year of this motor.

Thanks,
Joe

[fordman]

www.dormanproducts.com but htey didnt show anything for a 71 truck with a 360.

[Dragon]

http://www.summitracing.com/parts/RNB-594-146

Thanks,
Joe

It fits all FE engines except 428s or any engine using a factory 3.98 stroke crank. It can be used from 1958 to 1976, as long as the pulleys line up.

[convincor]

i would go with this over the stock for same price.
http://cgi.ebay.com/ebaymotors/HP-Harmo ... ccessories
Here it is for $81 free shipping- http://www.streetsideauto.com/search.asp?keywords=80009

[DuckRyder]

Summit also sells the Professional Products:

http://www.summitracing.com/parts/PFS-80009/

It is a little more but if you don't do E-Bay...

I agree it would be a better choice...

[convincor]

Summit will also match anyone's "advertised" price.

[joeflsts]

Summit also sells the Professional Products:

http://www.summitracing.com/parts/PFS-80009/

It is a little more but if you don't do E-Bay...

I agree it would be a better choice...

I wondered about this. Can I just remove the attached pully and replace it with my set up?

Joe

[fordman]

that one says it has a intergal pulley on it.

[convincor]

that pulley comes off and you can use whatever you want.

[DuckRyder]

Summit also sells the Professional Products:

http://www.summitracing.com/parts/PFS-80009/

It is a little more but if you don't do E-Bay...

I agree it would be a better choice...

I wondered about this. Can I just remove the attached pulley and replace it with my set up?

Joe

Yes,

If you blow the picture up you'll see the pulley has bolts around it so it comes off. Hawkrod had some hand in the design and has posted about it in the past.

[convincor]

and he's a post that shows it http://www.fordification.com/forum/view ... er#p405029