Valve job

Engine, ignition, fuel, cooling, exhaust

Moderators: Ranchero50, DuckRyder

Post Reply
User avatar
OldRedFord
Blue Oval Guru
Blue Oval Guru
Posts: 1314
Joined: Tue Jan 29, 2008 11:37 pm
Location: Hull GA
Contact:
Contact OldRedFord

Re: Valve job

Post by OldRedFord »

BobbyFord wrote:Tim, are those D3 castings?

Yes sir.
Tim

1972 F350 flatbed drw c6/390
1967 F600 project truck
Top
User avatar
OldRedFord
Blue Oval Guru
Blue Oval Guru
Posts: 1314
Joined: Tue Jan 29, 2008 11:37 pm
Location: Hull GA
Contact:
Contact OldRedFord

Re: Valve job

Post by OldRedFord »

Valve grinding compound different then valve lapping compound?
Tim

1972 F350 flatbed drw c6/390
1967 F600 project truck
Top
User avatar
BobbyFord
100% FORDified!
100% FORDified!
Posts: 5383
Joined: Sun Feb 04, 2007 9:52 am
Location: Chatsworth, California

Re: Valve job

Post by BobbyFord »

Permatex valve grinding compound? Same thing.
Top
User avatar
OldRedFord
Blue Oval Guru
Blue Oval Guru
Posts: 1314
Joined: Tue Jan 29, 2008 11:37 pm
Location: Hull GA
Contact:
Contact OldRedFord

Re: Valve job

Post by OldRedFord »

This stuff is made by VersaChem, came with two tubes...one coarse grit the other fine.
Tim

1972 F350 flatbed drw c6/390
1967 F600 project truck
Top
User avatar
BobbyFord
100% FORDified!
100% FORDified!
Posts: 5383
Joined: Sun Feb 04, 2007 9:52 am
Location: Chatsworth, California

Re: Valve job

Post by BobbyFord »

Try the fine first, no point in removing more metal than necessary.
Top
Post Reply

Return to “Engine”